Inflatable Light Oil Boom
The Inflatable Light Oil Boom is a lightweight and durable air inflated boom that covers the increasing demand for harbours, nearshore and offshore oil containment boom configurations, and is mainly deployed for emergency oil spills and protection.
The ILB is manufactured in high visibility red PVC-PU coated wovendtex 1100 polyester fabric. The boom has separate 4.8 m (15.8 ft) long welded air chambers that are fitted with Monsun XG 1 air valves. The boom is supplied with ASTM Z connectors, made in accordance with the F962 standard at each end.
The ballast chain is a hot dip galvanised DIN 763 steel chain that gives strength, correct and stable deployment in sweeping operations and provides excellent sea keeping properties. The ballast chain is incorporated in the base of the skirt.
The ballast chain is a hot dip galvanized DIN 763 steel chain that gives strength, correct and stable deployment in sweeping operations and provides excellent sea keeping properties. The ballast chain is incorporated in the base of the skirt. Due to its flexibility and rapid deployment, the ILB has been utilized in multiple oil spill containment operations worldwide in e.g. U-sweep configurations.
Features and Benefits
- For use in harbors, nearshore and in U-sweep configurations
- Widely used Monsun XG 1 air valve for easy air-inflation
- Easy to deploy
- Low maintenance and easy to clean
Auto Boom Neoprene
The Auto Boom Neoprene is a robust and durable single-point air inflated boom making it suitable for rapid emergency oil containment cases as well as permanent installations in harbours, nearshore and offshore scenarios.
This is manufactured in robust Neoprene. The boom has 3 m (10 ft) long air chambers. Each individual buoyancy chamber is isolated. In the event that one air chamber may become damaged or deflated, adjacent chambers will not be affected and will remain inflated. Air-inflation is done from the outer end of the boom via a 2″ Camlock. In addition, each air chamber is fitted with Monsun XG 1 air valves.
The ballast chain is a hot dip galvanised steel chain that gives strength, correct and stable deployment in sweeping operations and provides excellent sea keeping properties. The ballast chain is incorporated in the base of the skirt. The sections comes with ASTM Z connectors made in accordance with the F962 standard. The Harbour 970 can be deployed at 30 m/min (100 ft/min). It is a safe and easy to retrieve boom that easily deflates onto a storage reel.
Inflatable Boom, Permanent Deployment Boom
- single-point air inflation for simple and rapid deployment or chamber by chamber inflation
- compact storage volume
- durable fabric
- excellent wave following performance
- high buoyancy to weight ratio
- requires only one operator
- safe to use and deploy – low pressure air source
Rapid Deployment Boom
The Lamor Pack is a Tactical Response System for oil boom rapid deployment. It can be towed with speeds up to 20 knots by a work boat or other vessels. This enables quick arrival to the spill site. Thanks to the quick release of the solid float SFB boom from the bag the spreading of the oil can be efficiently prevented.
The boom is stored in its storage bag on a pallet ready for use. The pallet can be lifted onboard of a vessel or on a trailer (optional) to be road transported close to the spill site. For deployment the towline is connected to a workboat and the system is towed to the spill site. The drag anchor which is connected to the system is released and this opens the boom storage bag and the total length of 150 m (500 ft) boom is deployed in less than one minute. The boom can be then towed and anchored to the desired position and the work boat can be used for other activities. After the use the boom can be repacked in its storage bag and stored ready to use on the pallet, trailer or in warehouse.
The boom in the LBP 610/150m system is the standard Lamor Solid Floating SFB 610 (24”) Oil Boom in 5 x 30 m with ASTM boom connectors in both ends. The standard delivery also includes the skid, storage bag with cover, tow bridle and drag anchor. The deployment can be done by one or two operators.
The Silt Curtain
The Silt Curtain is specially designed to be used in conjunction with a conventional containment boom when the problem is the presence of sediments drifting in the water, caused by dredging or other type of construction work in a port, harbor, river or lake.
These materials are often drifting at a greater depth than usually covered by the skirt of a containment boom.
The silt curtain has a 2000 mm (alternatively 4000 mm or 6000 mm) high skirt and comes in stretches of 25 m. It is made of a polypropylene fabric reinforced with a highly resistant PET fibre, which due to its drainage capacity allows water to pass through while efficiently retaining the sediments.
When silt curtains are used to enclose open-water pipeline disposal operations, the vast majority (95 % or more) of the sediments descends to the bottom of the disposal area where it forms a fluid mud layer. The remaining 5 % or less of the sediments is responsible for the turbidity in the water column.
The silt curtain is connected to the oil ballast chain with shackles. The stretches of silt curtain are connected to each other also using shackles, while the boom itself is connected up using its normal connectors (ASTM, Norwegian, UNICON, etc.).
FOB for Coastal Areas
This flat foam floatation boom is designed for use in harbours or calm waters and is robust, lightweight and compact, used in 3knots without any problems.
These materials are often drifting at a greater depth than usually covered by the skirt of a containment boom.
Deployment and recovery
The floats, which are filled with closed cell foam, make quick deployment possible (typically 2 people and a light craft are needed). 250 metres of boom can be deployed in less than 5 minutes. The boom’s flat design means it can be stored on a manual or hydraulically driven winch and is easy to clean.
The FOB is composed of 1-metre long independent flat floats which guarantee floatation in case of damage.
Connection Between Booms
Each section is fitted with standard quick connectors, which may be ASTM, UNICON or Norwegian type as required.
- Easy and compact storage
- Made of durable oil-resistant material
- Quick and easy to deploy and recover
- Easy to clean.
Permanent Containment MK 8
Permanent Containment Booms are heavy-duty booms with high-density polyethylene floats. The boom is particularly robust and is made to give a particularly long service life in installations where booms are used frequently and on a permanent basis.
A boom with a heavy PU or PVC vertical barrier fabric and symmetrically placed foam-filled high-density polyethylene floats. The two halves of the floats are bolted together trapping the barrier fabric in between.
This gives rise to a particularly heavy-duty construction which is easy to maintain and repair on site. Most of the forces on the boom are absorbed by the ballast chain, which is shackled on to the lower part of the skirt. The ballast chain is connected between sections with “split-links” made from hot-dip galvanised steel.
Each section is fitted with marine grade aluminium ASTM connectors. Tools are not required to connect the sections together. Alternatively, Unicon or Norwegian type connectors may be delivered.
Permanent Fence Mk 8
The Permanent Fence Mk 8 910/30m (36 in/100 ft) is a heavy duty solid float boom that is designed specifically for permanent installations in e.g. harbors and water inlets. The MK 8 boom’s strength, high freeboard and reserve buoyancy floatation make it effective under harsh conditions.
The Mk 8 is manufactured from strong PVC coated belting fabric together with durable polyethylene floats. The floats are made from solid moulded closed cell polyethylene foam that is high temperature pressed to form the outer skin incorporating a unique splash guard handle. The booms have marine growth inhibitors and are UV resistant. The boom is equipped with galvanized steel ballast weights. The boom sections are supplied with ASTM Z or Slide type connectors, made in accordance with ASTM F962.
The Mk 8 oil containment and protection boom is durable and can withstand the impacts of heavy debris concentrations and has a long service life.
Solid Floatation Oil SFB
The Lamor Solid Floatation (SFB) has been developed to meet today’s requirement for a quick to deploy and economical containment boom system. The Lamor SFB will contain oil and floating debris, it is light in weight, easy to deploy and manufactured from durable materials.
Lamor SFB represents a cost effective way of maintaining readiness in many environments from industrial units to rivers and harbours. Manufactured from PVC fabric with
built in foam floatation, top tension member and connectors according to the customers’ requirements make for a versatile system. The 8 mm top tension cable is enclosed in protective sheath and tuned for deployment in current.
End connectors are standard on the ends of each section. These can be universal slide or ASTM “Z” type connectors. The boom has galvanized chain in double-wall chain pocket with reinforced ends as ballast and tension member. Optionally mid-section anchor points can be provided.
Lamor SFB is available in sizes ranging from 150 mm (6 inch) to 635 mm (24 inch) total height. The closed-cell foam logs are 1800 mm (6 ft) long. Lamor Solid Floatation Boom is manufactured in high visibility yellow as standard with an option of international orange.
Beach sealing booms provide an excellent seal against the shoreline in tidal areas: strong currents, areas exposed to strong tidal movements, rivers, estuaries and sheltered waters.
Beach sealing booms have a triangular cross-section with a continuous air-filled tube above and two water-filled ballast chambers below.
The air filled tube has three internal buoyancy chambers. Thus, the boom floats as a conventional boom when working in waters with sufficient depth, and by effect of the weight of the ballast and its flexibility, seals the foreshore in low tide conditions.
Beach sealing booms are manufactured from premium quality PVC-coated polyester. This material is both strong and light, and gives rise to a hard-wearing and virtually maintenance-free product.
On the underside of the boom there is a replaceable fabric, protecting the boom from wear and tear when working against abrasive surfaces. Each section is fitted with marine grade aluminium ASTM end connectors making the use of tools for connecting the sections together unnecessary.
At 3m long and 20cm in diameter these single skin Oil only booms are the heaviest strongest largest booms in our product range and also stronger than anything else available – that we are aware of. There are four booms contained within the clear plastic bag.
- All-in-one construction produces exceptional strength and prevents the boom from twisting.
Resists snagging on debris.
- End rings and snap hooks make deployment of the desired length fast and easy.
- Can stretch without failing.
- Made with recycled content.
- Fire retardant asperASTM726.
- Ensure that disposal of these sorbents complies with all regulations.